What products are the main products of Anping Huayao Agricultural Equipment Co., Ltd?

 

Specification for mobile bed in shed - hot dip galvanized mobile bed:

 

The design width of the bed is 1.4m, the length is 38m, and the height is 0.75m. Four groups are set for each span, with a total of 24 groups

 

The column and beam of the seedling bed are made of 40 × 30 × 1.5mm rectangular pipes, and the edge of aluminum alloy is used around the bed surface. All materials of mesh are treated by hot galvanizing.

 

Material: high quality low carbon steel wire

 

Wire diameter: 4.0mm /3.0mm

 

Mesh: 120 mm × 25mm 130mm × 30mm 50mm × 50mm

 

Size: 1.9m × 4m

 

In the moving bed, people generally adopt seedling tray, and the following advantages are obtained by using seedling tray

 

1. The seed dosage is less, and the production cost is reduced.

 

2. Keep the plant growth consistent.

 

3. All kinds of manual and automatic seeders are used together, which is convenient for centralized management and improving working efficiency.

 

4. The root system was not damaged during planting, and the seedling was slow and the survival rate was high.

 

         The frame of tide seedling bed includes end frame, side frame, guide wheel beam, roller group, cross beam, and end frame are one at the front and rear of the frame of tide irrigation seedling bed, one side frame is on the left and right of the frame of tide seedling bed, the end frame and the end of side frame are connected with each other. There are also a plurality of beams between the end frames. The end of the beam is connected with the front and rear end frames, There are also two guide wheel beams between the end frames. The front and rear ends of the two guide beam are connected with the front and rear end frames, and roller groups are installed on the two guide wheel beams. The invention adopts the end frame, side frame, end support and cross beam to make the tide bed frame. The structure is simple. The frame of the seedling bed is once again set with a guide wheel beam and a roller group. When used in practice, the frame can be moved flexibly by placing the frame on a special seedling bed guide rail.

 

          The main task of intelligent greenhouse is to measure temperature, humidity and light intensity, and transmit the information to the designated monitoring terminal. With the development of agriculture, people also put forward some requirements for the greenhouse environment monitoring system of medicinal materials. It is necessary to have the characteristics of high measurement accuracy, large coverage and low cost. Therefore, many greenhouse environment monitoring systems developed now are based on wireless sensor network, so that the above requirements can be met.