安平華耀潮汐苗床廠家，生產出售潮汐式苗床、灌溉苗床、移動苗床、固定苗床、花卉苗床、育苗床、多層苗床、無土栽培、草莓立體種植架、蘑菇架、農用護欄、智能噴灌系統等農業設施。我廠位于河北省衡水市，地理位置優越，發貨方便快捷，人員、技術、設備資金力量雄厚，是一家集加工、生產、銷售一體的廠家。
潮汐苗床潮汐式灌溉的系統組成：潮汐灌溉系統由潮汐灌溉栽培床、營養液循環系統(含營養液池、循環水泵、管路等)、控制系統、栽培容器(定植籃)4大部分組成。潮汐式灌溉的工作原理：潮汐式灌溉系統是基于潮水漲落原理而設計的一種高效節水灌溉系統，它適用于各類盆栽植物的種植和管理，可有效提高水資源和營養液的利用效率。潮汐式灌溉主要分為兩類，地面式和植床式。地面式潮汐灌溉系統是在地表砌一個可蓄水的苗盤裝水池，在其中分布若干出水孔和回水孔;植床式潮汐灌溉系統則是在苗床上搭建出一層大面積的蓄水苗盤，在苗盤上預留了出水和回水孔。在應用時，灌溉水或配比好的營養液由出水孔漫出，使整個苗床中的水位緩慢上升并達到合適的液位高度(稱為漲潮)，將栽培床淹沒約2-3公分的深度;在保持一定時間(作物根系充分吸收)后，約10-15分鐘后，營養液因毛細作用而上升至盆中介質的表面，此時，打開回水口，將營養液排出，回營養液池(稱為落潮)，待另一栽培床需水時再將營養液送出。潮汐灌溉系統具有調整營養液pH值和各種養分濃度的設備，為免營養液過度污濁增加介質的過濾系統和消毒系統。
Anping County Huayao cx-50 tidal seedbed unit price how much is a square meter
Anping Huayao tidal seedbed manufacturer produces and sells tidal seedbed, irrigation seedbed, mobile seedbed, fixed seedbed, flower seedbed, seedling bed, multi-layer seedbed, soilless cultivation, strawberry three-dimensional planting frame, mushroom rack, agricultural guardrail, intelligent sprinkler irrigation system and other agricultural facilities. Hebei Province, Hebei Province, a convenient, convenient location of water processing, production and sales personnel.
Tidal seedbed tidal irrigation system: tidal irrigation system consists of four parts: tidal irrigation cultivation bed, nutrient liquid circulation system (including nutrient solution pool, circulating water pump, pipeline, etc.), control system and cultivation container (planting basket).Working principle of tidal irrigation: tidal irrigation system is an efficient water-saving irrigation system designed based on the principle of tidal fluctuation. It is suitable for the planting and management of various potted plants, and can effectively improve the utilization efficiency of water resources and nutrient solution. Tidal irrigation can be divided into two types: surface irrigation and planting bed irrigation. The surface type tidal irrigation system is to build a water storage seedling tray tank on the surface, in which a number of outlet and return holes are distributed; the planting bed type tidal irrigation system is to build a large area of water storage seedling tray on the seedling bed, and reserve water outlet and backwater holes on the seedling tray. In the application, the irrigation water or nutrient solution with good proportion overflows from the outlet hole, so that the water level in the whole seedbed rises slowly and reaches the appropriate level height (called rising tide), which submerges the cultivation bed to a depth of about 2-3cm; After a certain period of time (fully absorbed by crop roots), the nutrient solution rises to the surface of the medium in the basin due to capillary effect after about 10-15 minutes. At this time, open the backwater port to discharge the nutrient solution and return to the nutrient solution pool (called ebb tide), and then send the nutrient solution out when the other cultivation bed needs water. Tidal irrigation system has the equipment to adjust the pH value of nutrient solution and the concentration of various nutrients.
